Drum Containment Rack Systems | Spill Control Storage
- Materials: Galvanized Steel, Powder-Coated Steel, Structural Steel Grating
- Capacities: 2-Drum to 12-Drum Rack Configurations
- Compliance: OSHA Safety Design, EPA Spill Containment Requirements
- Configurations: Horizontal Drum Storage, Vertical Drum Storage, Multi-Level Rack Systems
- Accessories: Dispensing Shelves, Roller Assemblies, Grates, Corner Guards
$2,470.98
$2,742.95
(You Save 10%)$3,498.98
$4,117.00
(You Save 15%)$2,898.98
$3,411.00
(You Save 15%)$2,398.98
$2,824.00
(You Save 15%)$3,198.98
$4,100.00
(You Save 22%)$99.98
$118.00
(You Save 15%)$499.98
$574.98
(You Save 13%)Product Comparison Chart
Rack Configuration and Drum Positioning Drum containment rack systems are manufactured in horizontal, vertical, and multi-tier storage configurations to support industrial fluid handling and secondary containment requirements. Horizontal drum racks position drums sideways to facilitate dispensing through faucets, pumps, or valves while minimizing manual lifting. Vertical rack systems maximize storage density by stacking drums across multiple levels within the same floor footprint. Multi-level containment systems combine horizontal dispensing stations with vertical storage positions, allowing facilities to separate active dispensing drums from reserve inventory. Rack dimensions commonly range from compact 2-drum systems to large 12-drum industrial storage assemblies exceeding 96 inches in width and height.
Steel Construction and Structural Engineering Containment rack systems are typically fabricated from galvanized or powder-coated structural steel designed to support concentrated drum loads under static storage conditions. Galvanized steel coatings provide corrosion resistance for humid, outdoor, or chemical-exposed environments. Heavy-duty steel grating supports drum weight while allowing spilled liquids to drain into integrated containment sumps below. Reinforced steel frames distribute vertical and horizontal loading forces generated by fully loaded 55-gallon steel or poly drums. Drum roller assemblies may be installed to reduce friction during drum rotation and dispensing operations. Corner guard systems provide additional impact protection in forklift traffic areas and warehouse aisles.
Integrated Spill Containment Systems Integrated spill sumps located beneath the rack structure provide secondary containment for leaking containers and dispensing operations. These containment basins are engineered to capture spills generated from drum punctures, failed valves, or transfer operations. Sump capacities are designed to support EPA spill containment regulations requiring secondary containment for hazardous liquid storage areas. Steel grate systems elevate drums above collected liquids while maintaining stable support surfaces. Optional drain systems may be included for controlled sump evacuation during maintenance procedures, depending on local environmental regulations and facility operating practices.
Regulatory Compliance and Workplace Safety Industrial drum rack systems are commonly installed to support OSHA workplace safety standards and EPA spill containment requirements under 40 CFR spill prevention guidelines. Facilities storing hazardous chemicals, oils, solvents, lubricants, or industrial liquids often require secondary containment infrastructure to reduce environmental contamination risks. OSHA-approved rack configurations assist with organized drum storage, aisle management, and safer dispensing operations. Corner guards, containment grates, and stable rack anchoring systems reduce the potential for forklift damage, drum tipping, and accidental spills within production and warehouse environments.
Industrial Applications and Selection Criteria Drum containment rack systems are utilized across chemical processing, petroleum handling, food manufacturing, agriculture, transportation maintenance, and industrial production facilities. Horizontal dispensing racks are commonly selected for oils, lubricants, detergents, and liquid chemical transfer applications. Vertical stacking systems are used where warehouse floor space is limited and higher storage density is required. Selection factors include total drum capacity, sump containment volume, compatibility with steel or poly drums, available forklift access, dispensing requirements, and indoor versus outdoor installation conditions. Facilities handling corrosive materials may require galvanized steel or chemically resistant coatings to reduce long-term corrosion exposure.
| Product | Configuration | Dimensions | Capacity | Material |
|---|---|---|---|---|
| 4-Drum Horizontal Rack with Spill Containment Sump | Horizontal Rack | Standard | 4 Drums | Galvanized Steel |
| 6-Drum Capacity Rack & Sump | Multi-Level Rack | Standard | 6 Drums | Steel |
| 3 x 2-Drum Horizontal Rack System | Horizontal Rack | 54" x 36" x 96" | 6 Drums | Steel |
| 2-Level Drum Rack with Spill Sump | 2 Horizontal / 4 Vertical | Standard | 6 Drums | Steel |
| 3-Level Drum Rack with Spill Sump | 4 Horizontal / 4 Vertical | 54" x 36" x 96" | 8 Drums | Steel |
| 9 Drum Containment Rack System | 3 Horizontal / 6 Vertical | 96" x 36" x 96" | 9 Drums | Steel |
| 12 Drum Containment Rack System | 6 Horizontal / 6 Vertical | 96" x 36" x 96" | 12 Drums | Steel |
Rack Configuration and Drum Positioning Drum containment rack systems are manufactured in horizontal, vertical, and multi-tier storage configurations to support industrial fluid handling and secondary containment requirements. Horizontal drum racks position drums sideways to facilitate dispensing through faucets, pumps, or valves while minimizing manual lifting. Vertical rack systems maximize storage density by stacking drums across multiple levels within the same floor footprint. Multi-level containment systems combine horizontal dispensing stations with vertical storage positions, allowing facilities to separate active dispensing drums from reserve inventory. Rack dimensions commonly range from compact 2-drum systems to large 12-drum industrial storage assemblies exceeding 96 inches in width and height.
Steel Construction and Structural Engineering Containment rack systems are typically fabricated from galvanized or powder-coated structural steel designed to support concentrated drum loads under static storage conditions. Galvanized steel coatings provide corrosion resistance for humid, outdoor, or chemical-exposed environments. Heavy-duty steel grating supports drum weight while allowing spilled liquids to drain into integrated containment sumps below. Reinforced steel frames distribute vertical and horizontal loading forces generated by fully loaded 55-gallon steel or poly drums. Drum roller assemblies may be installed to reduce friction during drum rotation and dispensing operations. Corner guard systems provide additional impact protection in forklift traffic areas and warehouse aisles.
Integrated Spill Containment Systems Integrated spill sumps located beneath the rack structure provide secondary containment for leaking containers and dispensing operations. These containment basins are engineered to capture spills generated from drum punctures, failed valves, or transfer operations. Sump capacities are designed to support EPA spill containment regulations requiring secondary containment for hazardous liquid storage areas. Steel grate systems elevate drums above collected liquids while maintaining stable support surfaces. Optional drain systems may be included for controlled sump evacuation during maintenance procedures, depending on local environmental regulations and facility operating practices.
Regulatory Compliance and Workplace Safety Industrial drum rack systems are commonly installed to support OSHA workplace safety standards and EPA spill containment requirements under 40 CFR spill prevention guidelines. Facilities storing hazardous chemicals, oils, solvents, lubricants, or industrial liquids often require secondary containment infrastructure to reduce environmental contamination risks. OSHA-approved rack configurations assist with organized drum storage, aisle management, and safer dispensing operations. Corner guards, containment grates, and stable rack anchoring systems reduce the potential for forklift damage, drum tipping, and accidental spills within production and warehouse environments.
Industrial Applications and Selection Criteria Drum containment rack systems are utilized across chemical processing, petroleum handling, food manufacturing, agriculture, transportation maintenance, and industrial production facilities. Horizontal dispensing racks are commonly selected for oils, lubricants, detergents, and liquid chemical transfer applications. Vertical stacking systems are used where warehouse floor space is limited and higher storage density is required. Selection factors include total drum capacity, sump containment volume, compatibility with steel or poly drums, available forklift access, dispensing requirements, and indoor versus outdoor installation conditions. Facilities handling corrosive materials may require galvanized steel or chemically resistant coatings to reduce long-term corrosion exposure.
