Economy Plastic  Drum Siphon Pump- Free Shipping
Zoom

Economy Plastic Drum Siphon Pump

Item Number# 5164-4400
Buy More, Save More!
QuantityPrice Each
1 - 5 pieces$24.95 ea.
6 - 11 pieces$23.70 ea.
12 - 23 pieces$22.45 ea.
24+ pieces$19.96 ea.

  • Description
  • Specs
  • You May Also Need
  • Q&As
  • Reviews

Description

This Polyethylene Siphon Drum Pump Economy Model is the lowest price for Plastic drum pumps, with Free Shipping, on the market.

Our Best Seller in Siphon Drum Pumps for Steel and Plastic Drums.

This Plastic Pump is Perfect for mildly corrosive liquids up to 140° F Fits 15 – 55-gallon Plastic and Steel drums. 34" long Intake Tube Threaded bung adapter For 2"Bung Openings of Most Plastic Drums and Steel Barrels 7/8" x 48" long discharge tube Approx 5 Gallon per Minute Flow Rate This High-density polyethylene Drum Siphon Pump is a good choice for water-based liquids, detergents, even some petroleum products. Simple, foolproof operation.

Pump bellows to start flow, control siphon action with an air vent in handle.5-55gl Plastic Siphon Pump FDA Approved Material will fit 2" NPT Bung Opening Pumps Approx 5 gals per min. May also be used as a manual pump.(note: for use on drum smaller than 55gl, the plastic feed tube must be cut to the depth of The Drum)

Free Ground Shipping for a limited time on this Drum Pump Only!

For Heavy Duty Model Siphon Pump Try this Item!

Manual Siphon Barrel Pump Features

Designed for quick and easy emptying of 15, 30, and 55-gallon drums Includes a standard 2 inch NPS bung adapter.

Siphon to a lower level or pumps to a higher level. (uses gravity to siphon)

Siphoning is controlled by air vent on top (increase or decrease siphoning speed by adjusting air vent) Discharge tube designed to be flexible for better control of the flow. Suction tube can be cut at an angle to lay flat against the bottom for easier transferring.

"Free Ground Shipping 48 States Only"

Specifications

    1. Heavy duty / Fast Siphon Pump / BPA Free
    2. Designed for quick and easy emptying of 15, 30, and 55 gallon drums
    3. Made of polyethylene and PVC. Comes standard with a 2" NPS bung adapter.
    4. Can be sued with mild acids, light oils, water based fluids and toher materials which are NOT Corrosive to polyethylene and PVC
    5. (DO NOT use with lacquer thinners)
    6. Siphons to a lower level or pumps to higher level. Siphoning is controlled by the air vent on top.
    7. Discharge tube is designed to be flexible for better control of the flow
    8. Suction tube is cut at a andle to lay flat against the bottom for easier transfering

Q & A's

Questions & Answers about Economy Plastic Drum Siphon Pump- Free Shipping

Ask a question about Economy Plastic Drum Siphon Pump- Free Shipping. Click here
Scroll to top