Bung Adapter for F425P Flux Liquid Saver Drum Pump
Zoom

Bung Adapter for F425P Flux Liquid Saver Drum Pump

Item Number# 8AP10450
$92.00

  • Description
  • You May Also Need
  • Q&As
  • PDFs
  • Reviews

Description

Flux Liquid Saver Drum Pump - 8AP10450
 

  • Empties drums to 1/2" from bottom
  • Save valuable raw materials
  • Choice of polypropylene or stainless steel

    Unique pump has specially designed suction tube and drainback stop. When pump stops pumping, simply close the backflow stop. Liquid remaining in pump cannot drain back into drum. Removes all but one pint of liquid. When used with BayTec's EnviroWedge® all but three ounces can be removed. Maximum viscosity 500 cPs. Pump tube is 39" long. Pumps and motors are interchangeable. Bung Adapter sold separately. Polypropylene Pump has polypropylene tube, Viton® o-rings and seal*, Tefzel® impeller and Hastelloy C shaft. Stainless Steel Pump has stainless tube and shaft, Viton® o-rings and seal*, Tefzel® impeller. Standard Motor is TEFC, 115 volt AC, 60 Hz, single-phase, 700 watts. Built-in thermal overload switch, manual reset. Will deliver up to 30 GPM. Supplied with 16' 3-wire cord and plug. Explosion-Proof Motor is 115 volt AC, 60 Hz, single-phase, 460 watts, UL-Listed for Class I, Groups C and D. Built-in thermal overload switch with manual reset. Delivers up to 25 GPM, maximum viscosity 800 cPs. Supplied with 16' 3-wire power cord
    without plug. Air Motor delivers up to 30 GPM. Uses 17 CFM air @ 85 psi. Explosion-proof rated.

    Features:

    Description: Bung adapter for F425P
    Weight: 1 lbs.
    .

     

     

  • Q & A's

    Questions & Answers about Bung Adapter for F425P Flux Liquid Saver Drum Pump

    Ask a question about Bung Adapter for F425P Flux Liquid Saver Drum Pump. Click here
    Scroll to top