Long Handle 3 NPT Inlet Cast Iron Gate Valves

• Long Handle: Gives you added leverage for easier manual flow control.
• Cast Iron Body: Provides rugged strength for demanding shop and plant use.
• Angled Discharge: Helps move thick liquids quickly while reducing splash.
• Brass Faceplate: Supports smooth movement and a dependable seal.
• Padlockable Design: Helps limit unwanted use in shared work areas.
• Viscous Liquid Use: Works with non-flammable liquids rated at 2,000 cPs or higher.

Long Handle 3 NPT inlet cast iron gate valve, item 8700EL30, is a heavy-duty manual dispensing valve for non-flammable viscous liquids, thick fluid flow control, and industrial drum or tank service. It helps you move dense liquids with better control and less mess during routine transfer work in busy shops.

The long cast iron handle gives you extra leverage, so opening and closing the valve feels smoother when the liquid is thick. Its large, nearly straight bore supports steady flow, while the angled oval discharge helps reduce splash. You get a simple manual setup that’s easy to understand, operate, and check during use.

This rugged gate valve is made for liquids with a minimum viscosity of 2,000 cPs, making it a strong fit for heavier products that do not pour like water. The machined and lapped brass faceplate helps the valve move cleanly and seal well, which supports dependable performance in daily dispensing tasks. The glossy black lacquer finish helps protect the cast iron surface while giving the valve a clean industrial look. A padlockable handle adds practical control for storage areas, maintenance rooms, and shared work sites. Because the valve is manual, your team can manage flow without power, batteries, or added controls.

Use this long handle cast iron gate valve where splash control, leverage, and a strong seal matter more than compact size. It’s especially useful when workers need steady, hands-on flow control from containers holding non-flammable thick liquids. Check the inlet size and liquid compatibility before installation to match your exact system. Item 8700EL30 is a practical choice for maintenance teams, production areas, and storage rooms that handle dense fluids such as oils, coatings, soaps, or similar non-flammable materials. The product data lists the inlet size as 1 1/2 NPT, while the product title references 3 NPT, so confirm the final connection size before ordering.

This valve is helpful when your process needs a simple shutoff point, controlled dispensing, or a cleaner pour from a drum, tote, or fixed container. Its 5 lb weight gives it a solid feel without making handling too difficult during setup. The long handle also helps when gloves are worn.