Kimwipes EX-L Wipes | 15 x 16.8 Case Pack
- Material: Low-lint disposable tissue wipers for controlled wiping tasks.
- Sheet Size: 15" x 16 4/5" individual wipe format.
- Case Pack: 2,100 wipes per case.
- Use Type: Disposable dry wipe for labs, production areas, and surface cleaning.
- Closure/Dispensing: Case-packed wipes for bulk workstation supply.
Product Comparison Chart
| Product | Sheet Size | Case Pack | Wipe Type | Primary Use |
|---|---|---|---|---|
| Kimwipes EX-L Wipes | 15" x 16 4/5" | 2,100 wipes | Disposable low-lint tissue wipe | Lab, production, inspection, and surface wiping |
Configuration Analysis
Kimwipes EX-L wipes are supplied as large-format disposable sheets rather than roll towels or reusable cloths. The 15" x 16 4/5" size provides more surface coverage than small laboratory tissues, making them suitable for wiping larger work surfaces, instruments, parts, and equipment housings. Case-packed distribution supports use in stockrooms, maintenance areas, and production work cells where multiple employees need access to the same wiping material. Because the wipes are disposable, they are typically used once and discarded after contact with dust, oils, light residues, or surface contaminants.
Material Engineering
Kimwipes EX-L wipes are designed for low-lint wiping compared with common paper towels. Low-lint construction is important where loose fibers can interfere with inspection, assembly, surface preparation, or laboratory work. The sheet structure allows the wipe to absorb light moisture and remove loose material from smooth surfaces. These wipes are not a replacement for heavy-duty shop rags when sharp edges, heavy solvents, or abrasive residue are involved. For routine dry wiping, glass cleaning, bench cleanup, and controlled surface contact, the tissue-style format provides a clean disposable option.
Regulatory Standards
Disposable wiping products are commonly used as part of housekeeping, contamination control, and workplace cleanliness procedures. Buyers should match wipe selection to the facility’s safety rules, waste handling practices, and chemical-use procedures. When wipes are used with solvents, oils, or regulated materials, disposal may be controlled by the chemical absorbed into the wipe rather than the wipe itself. Facilities should follow OSHA hazard communication practices, internal safety data sheets, and local disposal requirements when wipes become contaminated with hazardous or flammable substances.
Industrial Applications
Kimwipes EX-L wipes are used in laboratories, quality control areas, clean workstations, electronics handling areas, maintenance shops, and production floors. Common tasks include wiping glassware, cleaning work surfaces, removing light dust from equipment, handling parts during inspection, and preparing surfaces before measurement or assembly. In manufacturing environments, the larger sheet size helps reduce the number of wipes needed for benches, carts, trays, and tool surfaces. In laboratory settings, the low-lint format supports tasks where ordinary towels may leave fibers behind.
Selection Criteria
Buyers should evaluate wipe size, lint level, absorbency, case quantity, and disposal requirements. The 15" x 16 4/5" format is appropriate when smaller tissues do not provide enough coverage. The 2,100-count case pack supports bulk purchasing for high-use departments or multi-station facilities. For heavy grease, rough castings, sharp metal edges, or aggressive solvent wiping, a heavier industrial wiper may be required. For general dry wiping, inspection prep, lab cleanup, and controlled surface cleaning, Kimwipes EX-L wipes fit applications where a disposable low-lint sheet is needed.
