Deluxe Two-Way Liquid Vacuum Pump System for 55 Gallon Drums

Best Features

• Fast Drum Filling: Fills or empties a 55 gallon steel drum in about 90 seconds.
• Two-Way Use: Switches between vacuuming liquids and pumping liquids with one control knob.
• High Flow Rate: Vacuums non-flammable liquids up to 40 GPM and pumps up to 30 GPM.
• Spill Recovery Kit: Includes a 14" double blade squeegee tool and 54" ABS wand.
• Air Powered Design: Runs at 80 PSI with no moving pump parts to reduce wear.
• Drum Bung Mount: Attaches quickly to a 2" bung opening on tight head steel drums.

Deluxe two-way liquid vacuum pump system for 55 gallon drums helps you recover coolant, sludge, chips, and non-flammable liquid spills fast. This air powered system lets you vacuum liquid into a steel drum or pump liquid out of the drum using one simple control knob. This deluxe two-way pump system is built for shops, plants, maintenance areas, and spill cleanup jobs where speed matters. It can fill or empty a 55 gallon drum in about 90 seconds, which helps reduce cleanup time and keeps work areas safer and easier to manage.

You can use this system to vacuum non-flammable liquids up to 40 gallons per minute. It also pumps liquids up to 30 gallons per minute. That makes it useful for coolant recovery, machine cleanup, wet floor cleanup, and general liquid transfer in industrial work areas. The system runs on compressed air at 80 PSI. Because it has no moving pump parts, there are fewer parts to wear out during normal use. This makes it a practical choice for busy shops that need a rugged liquid recovery tool without a complex motor-driven pump.

The deluxe package includes the two-way pump system and a spill recovery kit. The spill recovery kit includes a 14" double blade squeegee tool and a sturdy one-piece 54" ABS wand. These tools help pull liquid from floors and move it into the drum with less mess. The pump attaches to the 2" bung opening of a tight head steel drum. Once attached, the control knob lets you switch between pumping and vacuuming. This makes the unit easier to use when you need to recover liquid first, then move or dispense it later.

An automatic shut off valve helps prevent overfilling during vacuum use. This is important when recovering spills or coolant because it helps protect the operator and work area from overflow. The included 10' polyethylene hose gives you working reach around equipment and shop floors. The aluminum chip wand helps collect coolant, sludge, chips, and similar shop waste. This makes the system useful around CNC machines, metalworking equipment, and maintenance areas where liquid and small debris can collect together. It helps reduce hand cleanup and downtime.

The stainless steel and PVC construction gives the system strength for industrial use. It is made for non-flammable liquids only and should be used with a proper tight head steel drum. The 55 gallon drum is not included with this deluxe two-way liquid vacuum pump system.

This unit is a good fit when you need fast liquid recovery without a powered electric pump. It helps clean spills, remove coolant, and transfer liquids from a drum with one air powered setup. For plants and maintenance crews, it can save time on repeated cleanup jobs.

Shop Floor Cleanup:
Use this deluxe two-way liquid vacuum pump system to remove coolant, sludge, chips, and liquid spills from work areas. The squeegee wand helps pull liquid from smooth floors, while the flexible hose gives you room to work around machines, drums, and maintenance equipment.

Drum Transfer Use:
The pump mounts to a 2" bung opening on a tight head steel drum and lets you move liquid in or out of the drum. This helps when you need one system for spill recovery, coolant removal, and liquid transfer in the same work area.

Air Powered Operation:
This system uses 80 PSI compressed air and has no moving pump parts. That design helps reduce mechanical wear and keeps the setup simple. It is made for non-flammable liquids only and should not be used with flammable materials.