CSA Low Profile Inline Splice Connection Kit <br><font color="#008000" >Free Shipping</font>
Zoom

CSA Low Profile Inline Splice Connection Kit
Free Shipping

Item Number# 8BHJHS-GET
$61.98

  • Description
  • Specs
  • You May Also Need
  • Q&As
  • PDFs
  • Reviews

Description

CSA Low-Profile Inline Splice Connection Kit (JHS-GET)

  • Provides low-profile inline splice connection for SLCBL, SLMCBL, and SLHCBL self-regulating heating cable.
  • Enough to complete one inline splice connection.
  • Low-profile design makes insulating heating cable connections easy.
  • For use in hazardous area locations with SLCBL cable only (CSA approved).
  • For use in non-hazardous area locations with SLCBL, SLMCBL, SLHCBL cable (non-CSA approved).
  • SA:Ordinary Locations
  • SA:Hazardous Location
  • T6 rated 3, 5, 8, 19 W/ft (10, 17, 25, 31 W/m)
  • T5 rated 12 W/ft (40 W/m)
  • Class I Division 2 Groups A, B, C, D
  • Class II Division 2 Groups E, F, G
  • Class III

    Kit Contents
  • 1 In-line splice housing
  • 2 Watertight sealing gaskets
  • 2 Housing covers with screws
  • 2 Watertight sealing grommets
  • 2 Pressure seal ends with screws

Specifications

  • Provides end seal connection for: SLCBL, SLMCBL, and SLHCBL self-regulating heating cable.
  • Amount:Enough to complete one end seal connection.
  • Hazardous Area Lacations::with SLCBL cable only (CSA approved).
  • Non-Hazardous Area Lacations: with SLCBL, SLMCBL, SLHCBL cable (non-CSA approved).
  • T6 rated: 3, 5, 8, 19 W/ft (10, 17, 25, 31 W/m)
  • T5 rated: 12 W/ft (40 W/m)
  • Class I :Division 2 Groups: A, B, C, D
  • Class II: Division 2 GroupsE, F, G
  • Class III:..

Q & A's

Questions & Answers about CSA Low Profile Inline Splice Connection Kit
Free Shipping

Question: "What is self-regulating cable?"
Answer: "Self-regulating cable, also known as heat tape or heat trace, is a semi-flexible heating cable that automatically regulates its heat output based upon surface temperature and ambient conditions. It is often used for freeze protection applications to wrap or trace pipes, tanks, vessels, roofing, and much more."
Question: "What is a Class I/Division 1 environment?"
Answer: "Class I/Division 1 is an environment in which ignitable concentrations of flammable gases or vapors may exist under normal operating conditions, uring repair and maintenance, or where faulty equipment might release these flammable gasses or vapors."
Question: "Where do I find Class I /Division 1 environments?"
Answer: "Common industries include Oil, Hydrocarbon & Gas Exploration and Refining, Chemical Manufacturing/Processing, Paint Production, Mining, Coal Processing, and many more."
Question: "How much heat does selfregulating cable generate?"
Answer:Depending upon model and wattage, heat output can vary greatly. Maximum operating temperatures range from 150°F to 392°F (65°C to 120°C), but because of the selfregulating design, actual temperatures are normally much lower.
Question: "What is the maximum allowable circuit length?"
Answer: "Depending on wattage, voltage, and circuit capacity, circuit lengths can range from 32 ft to 660 ft."
Question: "How do I select the best heating cable for my application?"
Answer: "BriskHeat provides, at no charge, a full-service heat-loss calculation and engineering support to make a recommendation based on the specifications of your application."
Question: "Do I need to insulate over the cable?"
Answer: "Yes, insulation is always recommended to maximize thermal performance and efficiency."
Question: "What insulation should I use with Self-Regulating heating cable?"
Answer:"Depending on the application, BriskHeat offers two types of insulation; Insul-Lock pre-formed foam insulation for pipe, and Silver-Series cloth insulators for pipe, valves, flanges, etc., as well as custom designed insulators. Contact BriskHeat to determine which best fits your requirements."

Ask a question about CSA Low Profile Inline Splice Connection Kit
Free Shipping
. Click here
Scroll to top