Briskheat &#174;   Single Phase Compressor Soft Starters for HVAC units and heat pumps | 115 Voltage <br><font color="#008000" >Free Shipping</font>
Zoom

Briskheat ® Single Phase Compressor Soft Starters for HVAC units and heat pumps | 115 Voltage
Free Shipping

Item Number# 8BHSS0B12-20SN
$388.98

  • Description
  • Specs
  • You May Also Need
  • Q&As
  • PDFs
  • Reviews

Description

Briskheat-Single-Phase-Compressor-Soft-Starters-for-HVAC-units-and-heat-pumps-|-115 Voltage

Reduces inrush start-current by 60% Automatic adjustment of the starting current to match compressor size and available supply voltage

Type SS0B12-20SN SS1B08-16SN SS1B16-32SN
Nominal Voltage rating 110-115 VAC 208-230 VAC 208-230 VAC
Single/Three phase Single Phase  Single Phase  Single Phase
Main frequency 60Hz +/- 3%  50Hz/60Hz +/- 3%  50Hz/60Hz +/-3%
Motor Current, max 
RLA/FLA range
12 A -20 A  8 A - 16 A  16 A - 32 A
Motor size in hp 0.75 to 1.5 hp  1.75 to 3.5 hp  3.5 to 7 hp
Contactor Secondary Secondary Secondary
LRA max 85 A 85 A 180 A
Start Current reduction 60 %...70 % of LRA  60 %...70 % of LRA  60 %...70 % of LRA
Startup torque reduction 30-40% 30-40% 30-40%
Rated Insulation Voltage 2kV 2kV 2kV
Degree of protection IP20 IP20 IP20
Operating Temperature (°C/°F) -20° to 60°C/ -4° to 140°F -20° to 60°C/ -4° to 140°F -20° to 60°C/ -4° to 140°F
Storage Temperature (°C/°F) -40° to 85°C/ -40° to 185°F -40° to 85°C/ -40° to 185°F -40° to 85°C/ -40° to 185°F
Number of starts per hour 15 starts/hr 15 starts/hr 15 starts/hr
Minimum startup voltage 103 V 108 V 108 V
Maximum high voltage 130 V 253 V 253 V
Shutdown on low voltage 98 V 175 V 175 V
Dimensions 5.30” x 2.94” x 1.96” (135 x 75 x 50 mm) 5.30” x 2.94” x 1.96” (135 x 75 x 50 mm) 5.30” x 2.94” x 1.96” (135 x 75 x 50 mm)
Weight g /lb 500 g/1.11 lb 500 g/1.11 lb 500 g/1.11 lb

Specifications

  • Reduces in-rush start-current by 60%
  • Automatic adjustment of the starting current to match compressor size and available supply voltage
  • Reduces the required size of back-up generators
  • Protects A/C compressor from:Stalling
  • Over-heating:Contactor arcing damage
  • Mechanical shockMotor reversal
  • For 1-phase scroll compressor applications

Q & A's

Questions & Answers about Briskheat ® Single Phase Compressor Soft Starters for HVAC units and heat pumps | 115 Voltage
Free Shipping

Question: "How does the mantle stir the contents in the flask? " By R.Rodgers
Answer: " A PTFE-coated magnetic stir bar is placed into the contents of the round-bottom flask. An internal magnet underneath the heater rotates, which causes the pellet to follow and stir the liquid."
Question: "What are the most common round-bottom flask heating applications? "
Answer: "The most common are: Heating and/or boiling of a liquid Distillation Contain chemical reactions, especially for reflux set-ups and lab-scale synthesis Storage of culture media
Question: "Are there any special installation steps I need to know before I start operation?"
Answer: "These are plug-and-play units which do not require any additional wiring or set-up. If a support rod is required, the support clamp accessory is attached to the side of the mantle to hold the support rod into position. *Always read the instruction manual prior to use."
Question: Why do the larger mantles have 2 zones?
Answer: "A Min/Max heater switch is used to control heating for low/high volumes of flask contents. Larger mantles have 2 zones to allow the user to only heat the lower portion of the flask when lower volumes are heated."
Question: "What if I need more precise temperature control?"
Answer: "Metal-housed mantles can be used in conjunction with independent temperature controllers for enhanced temperature accuracy. We recommend the SDX Digital PID controller."
Question: "Can these mantles be used to heat other objects that have different lower dimensions than the round-bottom flasks?"
Answer: "They can but it is not recommended as the heating process may be extremely inefficient"

Ask a question about Briskheat ® Single Phase Compressor Soft Starters for HVAC units and heat pumps | 115 Voltage
Free Shipping
. Click here
Scroll to top