Purogene Water Treatment Preserver -16 oz - Pint Size <br> <font color=green>Free Shipping</font>

Purogene Water Treatment Preserver -16 oz - Pint Size
Free Shipping

Item Number# 65016
(You Save 52%)

  • Description
  • Specs
  • You May Also Need
  • Q&As
  • PDFs
  • Reviews


This Water Storage Treatment Method is EPA approved

Use this economical 16oz Purogene  drinking water Treatment,
To make save Potable Water for  Storage Tanks,
and treat water for long term storage.

Purogene Prevent the developing of new ones. Purogene gets rid of bad odor and bad taste in stored potable water. Use Purogene water treatment for good and natural taste in drinking water, and as well as good taste in prepared drinks.

Works in all types of water systems:
Cold water system
hot water system
Plastic tanks
Fiberglas tanks
Metal tanks

This 16 oz. Bottle of Purogene will treat 480 gallons and makes the water safe to drink for an extended period of time.

Purogene use instructions  

Product Brochure for Purogene


1. Put 1 ounce (2 tablespoons) of Purogene for each 30 gallons of container capacity into the container.
Fill the container with potable water and seal it air tight.
2. Store the container out of sunlight and in as cool a place as possible.

Water Storage Facts:
  • The water stored must be potable (safe to drink).
  • Low mineral content water is preferred (reverse osmosis or distilled).
  • Water should be free of organic materials.
  • This treatment is NOT meant to purify unclean water, but stabilize already clean water.
  • Containers that are not completely opaque and are stored in a location that might be exposed to even a small amount of sunlight.
  • The Plastic Container must be covered with a completely opaque cover (such as heavy gauge blue plastic liner).
  • Exposure to sunlight will deteriorate the Purogene and render it ineffective in microbial control.

    Purofication of Water:
  • One ounce of 3R PUROGENE will purify thirty (30) gallons of drinking water,
    as well as control the build-up of slime and odor-causing agents in any drinking water system in RV units, campers, trailers, and boats.
  • Water treatment to control build-up of slime and odor-causing agents and enhance the taste of stored drinking water.
  • Drinking water should be treated at a rate of 1 fl oz (2 tablespoons) of 3R PUROGENE per 30 gallons of water (5 ppm ClO2 concentration).
  • This treatment will provide growth control, fresh taste and odor control to the water.
  • Treat each new-addition-of drinking water to the fresh water tank at the ratio of 1 fl oz (2 tablespoons) of 3R PUROGENE per 30 gallons of drinking water.
  • Treat as often as necessary to maintain fresh taste and odor control.

    Containers: Water containers must be free of oil, detergent, ammonia, and organic contaminates.
    Do not use steel containers with exposed metal which will come in contact with the stored water.
    If you do use Steel drums, they must be plastic lined. See our Epoxy Phenolic Lined Drums.

    Disinfecting Purogene water treatment (50 ppm ClO2 concentration):
  • Place 1 fl oz of 3R PUROGENE per 10 gallons of water tank capacity into a clean plastic or glass container.
  • To this add 1 tsp of Citric Acid Activator Crystals (lemon juice may be used, same amount) and let it stand for 5 minutes.
  • DO NOT breathe the fumes!
  • Pour the sanitizing solution into the water tank and fill the tank with potable water.
  • Turn on the water pump and drain a small amount of water from each of the faucets including hot water faucets so that the sanitizing solution gets into the entire system.
  • Refill the tank with potable water to replace drawn off solution.
  • Let the system full of sanitizing solution stand for at least 1 hour.
  • After the hour, drain the tank and refill with potable water treated with 5 ppm of ClO2 as described above. Draw off some water from all faucets including the water heater tank to purge the sanitizing solution.
  • To maintain the tank, repeat this procedure as often as necessary.
  • Specifications

    • Size Bottle16 oz
    • Treats:1oz per 30 Gallons
    • Use:Long Term Water Treatment Gisinfection of drinking water
    • Contains: chlorine dioxide

    Q & A's

    Questions & Answers about Purogene Water Treatment Preserver -16 oz - Pint Size
    Free Shipping

    Question: Is this the same thing as Bleach. By Jim R.
    Answer: No! This is chlorine dioxide Which is used worldwide as a water purifier.

    Ask a question about Purogene Water Treatment Preserver -16 oz - Pint Size
    Free Shipping
    . Click here

    Customer Reviews

    Other Customers Rated this item:
    5 out of 5 stars
      Fresh water, By: ,
    Great product got this to keep my fresh water in the camper drinkable so far so good
    Was this rating helpful to you?   Yes   No
      Easy to use!, By: , verified customer
    We are full-time RVers. Although most of the time we do have to rely on our fresh water tank, we do keep water in it when we are parked. I sanitize yearly with this product and then add it when we fill with water. Our order was filled and delivered in good time. Thank you!
    Was this rating helpful to you?   Yes   No
      The answer to my water storing problems, By: , verified customer
    I store around 400 gallons of water for emergency use. I the past, I used bleach to preserve it but that does not deal with the problems associated with long term storage. This product takes care of those issues at a very reasonable price.

    Fast delivery !!
    4 people found this review helpfulWas this rating helpful to you?   Yes   No
      Sulfer smell gone in Rv Fresh water tank, By: ,
    I really was shocked and thrilled this worked! I have a plastics guy that works on RV water tanks and he recommended it for a tank we could not get clean! I followed the directions and left overnight and it worked! No more bad taste or sulfur smell!!! So pleased!
    4 people found this review helpfulWas this rating helpful to you?   Yes   No
    Scroll to top