Plastic 16 Gallon Drum Heaters, Pre-Set,120v
- You May Also Need
Durable heaters install instantly with spring-loaded toggle clamp and spread heat over the entire heater surface. Drum and pail heaters have internal fiberglass insulation (except LIMD55-115). Choice of three heating controls. All are equipped with neon pilot light and 6' power cord and are warranted for one year. Units are not moisture-proof or explosion-proof. Not for use with flammables or near a flammable area. For indoor use only. UL-Listed and CSA certified.
Thermostat Control with Three-Heat Switch designed for use on steel drums and pails with materials with good heat receptivity. Thermostat bulb senses temperature in an area distant from the heating elements. Three-heat switch allows three wattage ranges per thermostat setting.
Control with Three-Heat Switch designed for use on steel drums and pails with
materials that are subject to charring, burning or separation, such as food,
chocolate, honey, light oils, and undercoating materials. These heaters do not
have a thermostat and will not automatically reach and hold a given temperature.
Infinite control operates within each of three wattage ranges for closer heat
Plastic Drum Heater with Pre-Set (Non-adjustable) Thermostat designed for heating materials in high density polyethylene drums and pails. Thermostat is factory set; will not exceed the maximum plastic-safe temperature of 165 degrees F recommended by many plastic drum manufacturers. Simple on-off power control. AGM, TRX and SRX series are not for use with lined steel drums or plastic drums.
Container Size (gal.): 16
NEMA Plug: 5-15 P
Wt.: 10 lbs.
Container Dia. (in.): 14 1/2