SLCBL Downspout Hanger Kit (SLCBL-RDOWN1)
Free Shipping

SLCBL Downspout Hanger Kit (SLCBL-RDOWN1) <br><font color="#008000" >Free Shipping</font>
BriskHeat Downspout Gutter Hangers are used to safely position heating cable into downspouts as part of a roof & gutter snow melting and de-icing system. Combined with SpeedTrace Self-Regulating Heating Cable, BriskHeat de icing cables for gutters, this kit completes your gutter heat tape de-icing solution.

Provides mechanical protection to prevent damage to the heating cable as it may go over sharp edges in roof & gutters. For use with SLCBL and SpeedTrace self-regulating heating cable for roof & gutter snow melting and de-icing. Must be bent at 90° and secured with UV resistant cable ties before installation.
SLCBL Downspout Hanger Kit <br><font color="#008000" >Free Shipping</font>
SLCBL Downspout Hanger Kit
Free Shipping
$24.98
  • Step 1: Bend the Downspout Hanger Bracket to approximately 90 degree. Insert cable ties through holes on the Hanger Bracket and attach the gutter heat cable.
  • Step 2: Position the Hanger Bracket and tighten the cable ties. Trim off excess cable tie.
  • Step 3: The Hanger Bracket should be centered on the edge of the downspout to prevent mechanical damage and to support the heating cable.
Scroll to top