Fits 7/16" shaft of in-drum agitator
Power your built-in drum
agitator with one of these powerful air drive units. Screw-in bung mount fits
standard 1-1/2” center agitator bung opening (2” mount, if needed, is available
at no extra charge). Supplied with 7/16” I.D. (5/8” O.D.) square drive coupler,
1/8” NPT male quick disconnect fitting for air line, speed/flow control
regulator and muffler. An air filter and in-line lubricator with 1/8” ports are
recommended and are available for purchase below.
Model AD95 is a good
all-purpose agitator drive with a 15:1 gear reducer that produces start up
torque of 60 in./lbs. and a maximum torque of 95 in./lbs. Unloaded running
speed: 300 RPM @ 60 PSI. Max. 20 CFM.
Model AD792 is ideal
for mixing heavy pigmented products. It produces a maximum start up torque of
792 in./lbs. and tapers off to 384 in./lbs. at 77 RPM. Unloaded running speed:
156 RPM @ 60 PSI. Max. 18 CFM.
Description: Agitator Drive, 792 lb. torque
Wt.: 4 lb.