5 Gallon HDPE Bottle & UN Rated Corrugated Carton

• 5 Gallon Capacity: Stores and ships up to five gallons of compatible liquid products in one complete package.
• UN Rated Packaging: Meets UN specification 4G/Y30/S requirements for approved hazardous material shipping applications.
• Double Wall Carton: Heavy-duty 350 lb corrugated kraft construction helps protect the inner bottle during handling and transport.
• Easy Handling: A molded top handle and bottom finger grips give you better control when lifting and pouring.
• Fast Filling: The large 70 mm screw cap opening makes filling and draining the HDPE bottle easier.
• Smooth Dispensing: A venting cap helps maintain steady liquid flow and reduces chugging while the container is emptied.

The 5 Gallon Assembled Bottle & Carton Hedpak corrugated cardboard combination packaging gives you a 5 gallon HDPE liquid container, 350 lb double wall shipping carton, and UN rated 4G/Y30/S packaging in one assembled unit. It provides a practical way to package, handle, store, and transport compatible liquid products in commercial and industrial settings. Inside the carton is a semi-rigid high-density polyethylene bottle designed to fit securely within the corrugated outer container. The HDPE construction offers dependable liquid containment while keeping the package manageable at only 2.6 pounds empty. Since the bottle and carton arrive assembled, you can reduce setup work before filling, closing, labeling, or preparing the package for shipment. A molded top handle gives you a solid gripping point when moving the container. Bottom finger grips provide extra control when you need to tilt and pour from a full five-gallon bottle. The wide 70 mm screw cap opening also helps make routine filling, draining, inspection, and cleaning tasks easier than working through a narrow container opening. For controlled dispensing, the bottle includes an in-line spout designed for use with a compatible 3/4-inch faucet sold separately. The handle also contains a special venting cap that allows air into the container as liquid leaves. This design helps create a smoother stream while reducing the stop-and-start chugging that can make dispensing harder to control. The assembled package measures 10 1/2 inches long by 10 1/2 inches wide by 16 1/2 inches high. It meets FDA requirements and carries a UN 4G/Y30/S rating for applicable hazardous material packaging uses. Always confirm product compatibility, closure requirements, transportation rules, and shipping mode before using the container for regulated materials or commercial distribution.

This Hedpak combination package can support chemical processing, manufacturing, maintenance, laboratory supply, industrial distribution, and emergency preparation applications where a durable liquid container and protective outer carton are useful. Its square carton shape also makes the package easier to organize on warehouse shelving, pallets, workbenches, or other storage areas than many exposed round containers. You can use the package when repeated pouring or dispensing is part of the job because its grip points, large opening, vented design, and optional faucet connection support practical day-to-day handling. The carton also creates a convenient outer surface for product labels, shipping marks, handling instructions, lot information, or other required identification used in your packaging process. The package is supplied assembled, helping reduce the steps needed to prepare separate bottles and cartons before use. Its 350 lb double wall kraft corrugated construction adds an outer layer around the HDPE bottle during storage and ground transportation. This configuration is not acceptable for air transportation, so you should select a suitable packaging system when air shipment is required. Because compatibility requirements vary by product, confirm that your liquid, closure system, shipping method, and intended use meet all applicable regulations before filling the container. A compatible 3/4-inch faucet can be ordered separately when you need convenient dispensing from the in-line spout. This setup can be especially useful when measured or repeated liquid access is needed.