Thermostat Control 240v 55 Gallon Steel Drum Heater, 60-250°
Increase flow rate of
Heater models for steel and plastic drums, pails
Choice of heating controls
Durable heaters install
instantly with spring-loaded toggle clamp and spread heat over the entire heater
surface. Drum and pail heaters have internal fiberglass insulation (except
LIMD55-115). Choice of three heating controls. All are equipped with neon pilot
light and 6' power cord and are warranted for one year. Units are not
moisture-proof or explosion-proof. Not for use with flammables or near a
flammable area. For indoor use only. UL-Listed and CSA certified.
with Three-Heat Switch designed for use on steel drums and pails with materials
with good heat receptivity. Thermostat bulb senses temperature in an area
distant from the heating elements. Three-heat switch allows three wattage ranges
per thermostat setting.
Control with Three-Heat Switch designed for use on steel drums and pails with
materials that are subject to charring, burning or separation, such as food,
chocolate, honey, light oils, and undercoating materials. These heaters do not
have a thermostat and will not automatically reach and hold a given temperature.
Infinite control operates within each of three wattage ranges for closer heat
Plastic Drum Heater
with Pre-Set (Non-adjustable) Thermostat designed for heating materials in high
density polyethylene drums and pails. Thermostat is factory set; will not exceed
the maximum plastic-safe temperature of 165 degrees F recommended by many
plastic drum manufacturers. Simple on-off power control. AGM, TRX and SRX series
are not for use with lined steel drums or plastic drums.
Container Size (gal.): 55
NEMA Plug: 6-15 P
Temp. Range (°F): 60 - 250
Wt.:15 lbs. Container Dia. (in.): 22 1/2