8700W & 8COM4417 2” Faucets
have large bore openings deliver high flow, even with viscous liquids, and are
designed for use with drums and certain bulk tanks, such as collapsible IBCs,
that have a 2” NPS bung opening (See Attachments required for use with IBCs with
inner liners). Both faucets can be disassembled for cleaning and conform to FDA
regulations for food handling. Faucet Body: HDPE, Internal Valve: LLDPE, Gasket:
Black Nitrile Rubber, Retaining Ring: Polypropylene.
8700W Faucet features a
vertical on/off control knob, vertical dispensing spout with male 2” BSP male
threads and 2” BSP male threaded inlet. 8COM4417 Faucet features an offset on/off
control knob. With no downward spout, this tap considered an inline
straight-through faucet with 2” BSP male threaded inlet and outlet, allowing
bottom discharge from floor-level containers.
8COM4439 2” Cutter Adapter
is required when using faucets 8700W or 8COM4417 with IBCs equipped with inner
liners. The adapter attaches to container-side of the faucet and its stainless
steel cutter pin pierces the liner as the faucet is screwed into container. 430P
¾” Faucet is ideal for use with faster-running liquids in drums, carboys, Gerri
cans and other containers with ¾” NPS female threaded openings. Needle-style
valve for maximum flow control precision. Gasket eliminates leakage. Faucet
Body: Polyethylene, Gasket: Nitrile Rubber.
Features:
Description: 2" faucet
with spout
Weight: 2 lbs.
