Beckson Pvc Stroke Acids - 2" Buttress 3' Hose | Plastic Drum Pump | 2 IN BUTTRESS ADAPTER, 1 1/4 IN X 3 FT HOSE

For alkalis, acids, and petroleum products

Self-priming delivers one gallon in just 5 strokes

Models for steel or plastic drums li2 IN BUTTRESS ADAPTER, 1 1/4 IN X 3 FT HOSE

Fits 55-gallon plastic drum

PVC with Viton® Seals

28 oz per stroke

Hose Length: 3'

Versatile Beckson Pvc Stroke Acids Plastic Drum Pump are made of a special PVC resin for durability and long life. Designed to handle alkali, acid and petroleum products as dictated by the combination of the valve and seal materials of construction. Pumps are 1 1/2" D x 38" L. Supplied with a choice of the bung adapter and welded on 3' or 6' long, 1 1/4" D hose. Weight 5 lbs. Optional Strap-Lock slips over the pump and is padlocked in place (lock not included) to prevent unauthorized dispensing.

Choose from the group of pumps below based on the liquid type and always check with your BayTec Customer Service Representative for chemical compatibility.

Acid Pumps have Viton® valves and seals, polyethylene hose. UL-Listed for sulfuric acid 50% maximum, 120º F maximum. Do not use with alkalis, acetic acid (30%), hydrofluoric acid or methyl alcohol.

The Beckson® Acid Stroke Pump is designed to safely transfer most acids eliminating the dangerous practice of lifting or tilting drums and carboys.

This acid pump has Viton® valves and seals and a polyethylene hose. They are UL Listed for Sulfuric acid (50% concentration, 120º F maximum). They fit plastic drums with 2-inch buttress.

These versatile hand pumps are made of a special PVC resin for durability and long life. Pumps are 1 1/2 inch diameter x 38 inches long. Supplied with a 2-inch course thread buttress adapter and welded on 3 foot long, 1 1/4 inch diameter polyethylene discharge hose. The pump is self-priming and delivers 28 ounces a stroke.

Shown 8P236S3.